What kind of fog cannon for coal yard/chemical plant?
When choosing a fog cannon for a coal yard or chemical plant, it should focus on its coverage, working efficiency, spraying uniformity, power supporting adaptability, installation form, intelligent operation, energy saving and low consumption and green environmental protection. Below by Zheng Tong editor to take you to explore the selection of fog cannon specific standards and recommendations are what it is!
1. Coverage
Range requirements: coal yards and chemical plants are usually large areas, so you need to choose a fog cannon with a long range to ensure that it can cover the entire area of action. For example, you can choose a fog cannon with a range between 30 meters and 150 meters, such as Zhengzhou Zhengtong Fans Manufacturing Co.
Spray angle: the horizontal rotation angle and overhead angle adjustment range of the fog cannon is also an important indicator for evaluating its coverage ability. Wide spray angle can make the fog cannon to adapt to the dust removal needs of different directions, such as ZT-50 meters box-type fog cannon has good maneuverability and wide spray angle.
2.Work efficiency
Spraying speed: High-efficiency fog cannon can produce a large amount of water mist in a short period of time to quickly inhibit dust. Therefore, when choosing a fog cannon, you should pay attention to its spraying speed and power.
Continuous working ability: In a large factory, the fog cannon may need to work continuously for a long time, so the machine with the ability to run stably for a long time is preferred.
3. Spray uniformity
Fog particle fineness: the fog cannon spray fog particle size for the dust reduction effect is critical. Fine fog particles can more quickly react with the dust in the air, so that it settles. Ideal fog particle diameter should be ≤ 30μm.
Adsorption: the fog cannon spraying water mist should be able to quickly form a moist mist with the dust, in order to achieve rapid dust reduction.
4. Adaptability of power supply
Power adaptability: the power source of the fog cannon should be flexibly configured according to the site conditions, such as the use of 380V utility or diesel generator set, in order to improve the adaptability and convenience of the machine.
Environmental adaptability: for different environmental conditions (such as low temperature or explosion-proof areas), the fog cannon should have the appropriate supporting facilities and functions, such as cold insulation and heat preservation and explosion-proof function.
5. Installation form
Installation convenience: choose easy to install the fog cannon, can save installation costs and time. For example, some fog cannon can be installed directly on the concrete platform, or can be vehicle-mounted mobile.
Versatility: According to different usage scenarios, the fog cannon should provide a variety of installation methods, such as fixed, tower, mobile, etc., to meet different needs.
6. Intelligent operation
Remote control function: modern fog cannon should be equipped with remote control and intelligent control function so that users can control remotely and reduce labor intensity.
Simplicity of operation: easy-to-operate interface and high degree of automation of the operating system can improve work efficiency and reduce the risk of misuse.
7. Energy saving and low consumption
Water-saving performance: selecting a water-saving fog cannon can reduce the consumption of water resources, such as certain models of fog cannon in the area covered with dust than other spraying equipment to save energy 70% to 80%.
Energy consumption level: low energy consumption equipment not only saves operating costs, but also more environmentally friendly.
8.Green
Secondary pollution avoidance: While suppressing dust, it should be ensured that the fog cannon will not cause water pollution and other secondary pollution problems.
Environmental protection certification: when buying a fog cannon, you can check whether it has the relevant environmental protection certification to ensure the environmental performance of the equipment.
In addition, after understanding the above, you also need to pay attention to the following points:
Safety performance: especially in chemical plants and other potentially flammable and explosive environments used in the fog cannon must meet the explosion-proof standards.
Difficulty of maintenance: a fog cannon that is easy to maintain and service can reduce the maintenance cost and workload in the later stage.
Brand and after-sales service: choosing a well-known brand and a manufacturer that provides good after-sales service will allow you to get timely and effective solutions when problems arise with your equipment. It is best to have a manufacturer with more than ten years of experience like Zhengzhou Zhengtong Company in order to buy and use it with peace of mind.
In summary, when choosing a fog cannon, coal yards and chemical plants should consider several factors according to their specific needs and scene characteristics. These factors include the coverage of the fog cannon, work efficiency, spraying uniformity, power supporting adaptability, installation form, intelligent operation, energy saving and low consumption, as well as green environmental protection. At the same time, attention should also be paid to the safety performance of the fog cannon, easy maintenance, as well as brand and after-sales service. Through careful evaluation and comparison, you can choose the fog cannon that best suits your scenario needs and effectively improve the environmental quality of the coal yard and chemical plant.
