Fog cannon, as an efficient dust removal equipment, is widely used in construction sites, mines, harbors and other dusty places. It is through the spraying of fine water mist, and the dust particles in the air combined and cohesion into a cluster, and finally under the action of gravity sink to the ground, so as to achieve the purpose of dust removal. Then how to play the biggest role of the equipment? Below by zheng tong editor to take you to understand it!

1.Consider the operating environment: 

According to the size and shape of the operating environment to choose the appropriate spray distance and coverage. Large operating areas such as mines or large construction sites require more powerful models to achieve effective coverage.

2. Consider the spray effect: 

The smaller the diameter of the water mist particles, the easier it is to combine with the dust particles in the air to improve the dust reduction effect. General fog cannon water mist particles diameter between 30-200μm.

3. Consider the functional modules: 

Understand the composition of the functional modules of the fog cannon, including the spraying system, water circuit and atomization system, electronic control system, etc., so as to carry out appropriate maintenance in the process of use.

Operation modes: Choose different types of fog cannons, such as fixed, tower, lift, tractor and vehicle-mounted, according to the user's installation requirements. Different operation modes, such as remote control, on-site remote control, manual operation, etc., should also be taken into account.

4. Operation method: 

The fog cannon looks like a behemoth, the operation can be controlled by a small remote control. Above the remote control is labeled with fan on, off, pump on, off, spray mouth up, down, left, right, 4 directions a total of 8 buttons, in the cab can be operated, it is very convenient to use.

5. Clean nozzles: 

Clean the nozzles regularly to prevent clogging and ensure the spray effect.

Check the system: Regularly check the spray system, water circuit and atomization system, electronic control system and other major functional modules to ensure that the equipment is in good condition.

(1). Choose the right fog cannon.

(2). Use the fog cannon correctly.

(3). Regular maintenance of the fog cannon

(4). Avoid prolonged standby or shutdown

(5). Save energy

6. Reasonable planning of use time: 

Long time standby or shutdown should be avoided as much as possible to prolong the service life of the equipment.

7. Energy-saving design: 

Considering the power consumption of the fog cannon, choosing energy-saving equipment can reduce the operating cost.

8. Water-saving design: 

Fogging dust, compared with spray guns, sprinklers and other dust suppression equipment to save water 70-80%.

In general, to make the fog cannon play the greatest role, need to pay attention to the above aspects. At the same time, it is recommended to consult a manufacturer with more than ten years of experience like zhengzhou zhengtong, with professionals and sales consultants, to get more detailed product information and professional advice.