How to maintain the fog cannon?

To make the purchase of the fog cannon service life longer, you need to pay attention to the late maintenance of the equipment, then how to maintain the fog cannon? Here by zheng tong editor to take you to understand it!

1. Check the state of the equipment

Check the triangle belt: Often check whether the triangle belt of the fog cannon is slack or not is crucial, because the slack triangle belt will affect the normal operation of the equipment. If the triangle belt is found to be slack, it should be adjusted in time according to the manual to ensure the stability and safety of the equipment.

Check the plunger pump: Regularly checking whether there is enough lubricant and grease in the plunger pump is also an important part of daily maintenance. Insufficient lubricant will lead to increased wear and tear of the equipment, thus affecting the normal operation and life of the equipment. Therefore, lubricant should be replenished as soon as it is found to be insufficient.

Check the spray pipe: The spray pipe is an important part of the fog cannon, and its integrity directly affects the spraying effect. Regularly check whether the spray pipe has rupture or whether the joint gasket is broken, and should be replaced in time when problems are found to ensure the normal spraying effect.

2. Clean the structure of the equipment

Clean the external structure: After using the fog cannon for a period of time, the surface will accumulate a lot of dust and dirt, which will affect the equipment's thermal performance and operational efficiency. Therefore, regular use of special cleaning agents and cleaning tools to clean the outside of the equipment is very necessary.

Cleaning the nozzle and water pipe system: The cleaning of the nozzle and water pipe system is one of the key steps to ensure the normal operation of the fog cannon. Regular cleaning of the nozzle and water pipe system can prevent clogging and ensure smooth water flow, thus improving the uniformity and stability of the spray effect.

3. Lubrication and rust treatment

Lubrication of moving parts: Regular lubrication of the moving parts of the fog cannon can reduce friction and wear and prolong the service life of the equipment. For example, lubricate the rotating parts to ensure that the equipment can run smoothly when in use.

Rust prevention treatment: After long time use, the fog cannon may appear rust phenomenon, especially in the humid environment. Therefore, regular anti-rust treatment can effectively extend the service life of the equipment and maintain the integrity of the equipment.

4.overhaul the electrical system

Check the electrical line: Regularly checking whether the electrical line is in good contact is an important part of ensuring the normal operation of the fog cannon. Timely detection and treatment of possible failures can avoid equipment due to electrical problems and can not work properly.

Inspection and maintenance of the control system: The normal operation of the control system is vital to the operation of the fog cannon. Regular inspection and maintenance of the control system can ensure the accuracy and safety of equipment operation.

5. Develop a maintenance plan

Develop a maintenance plan: By developing a reasonable maintenance plan, including cleaning cycle, overhaul cycle, etc., you can make the maintenance work more organized. This not only ensures the long-term stable operation of the equipment, but also improves the working efficiency and dust reduction effect.

6. Pay attention to storage protection

Selection of storage site: When the fog cannon is not used for a long time, the correct storage and protection work is particularly important. You should choose a dry and ventilated storage site, and take measures such as dustproof, moisture-proof and sun-proof to prevent the equipment from moisture, rust and other problems.

Protecting key components: When storing, removable parts such as nozzles, belts, etc. Should also be removed and rinsed out, and placed in a cool and dry place together with the body. If it is a rubber product, you need to hang it on the wall to avoid extrusion damage. At the same time, keep away from fertilizers, pesticides and other corrosive items to avoid rust damage.

In general, through these maintenance measures, you can effectively reduce the probability of failure of the fog cannon, extend its service life, and ensure that it plays the best effect in the environmental management work.